TeraFlex JL 2dr: 3.5” RT3 Coil Spring Base Lift Kit – No Shocks

The TeraFlex JL 4dr: 3.5" RT3 Coil Spring Base Lift Kit includes just the basic lift components only and doesn’t have the drivability of a full suspension system. Requires adjustable control arms and adjustable front track bar to correct suspension geometry.

Does NOT include shocks. We recommend Falcon Performance Shocks. These are the only shock absorbers engineered to work with TeraFlex lift coil springs to improve both compression and rebound for optimal vehicle stability. Shocks are available separately.

Specs:

• JL Wrangler (2-door)
• Lift Height: 3.5”

Max Tire Diameter:

• Sport/Sahara Fenders: 35” (w/ 3” front & 2.5” rear bump stops)
• Rubicon Fenders: 35” (w/ 2” front & 2” rear bump stops)
• Rubicon Fenders: 37” (w/ 2.5” front & 3” rear bump stops)

Includes:

• 3.5” Lift Coil Spring Kit (JL2 Front: # 1863002 & JL2 Rear: # 1863102)
• Front Track Bar Bracket (2.5-3.5” Lift) (# 1953250)
• Rear Track Bar Bracket (2.5-4.5” Lift) (# 1953600)
• Front Sway Quick Disconnect Kit (0-4.5” Lift) (# 1764000)
• 11.5” Rear Sway Bar Link Kit w/ Swivel Stud (# 1764300)
• Front Brake Line Anchor Kit (# 1101255)
• All necessary hardware
• And more

Note(s):

• Caster correction required – NOT INCLUDED. Recommended components: Front Lower Sport Control Arm Kit (# 1253000), or Front Control Arm Sport Frame Bracket Kit (# 1938125), or adjustable 8-Arm Short Control Arm Kit (Alpine: # 1416610 or Alpine IR: 1416510), or adjustable 8-Arm Long Control Arm & Bracket Kit (Alpine: # 1316010 or Alpine IR: 1310510), and/or adjustable Alpine IR Front Track Bar (# 1753420).
• Requires wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters (# 1057000).
• Models w/ plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35”+ tires.
• Requires 2”-Stroke SpeedBump & Progressive Bump Stop Kit (# 1958352).
• Requires 2” Bump Stop Strike Pad Extension Kit (# 1959500) and/or 0.5” Bump Stop Strike Pad Shim Kit (# 1959300).
• Requires cutting/removal of factory control arm bracketry to install Alpine Long Arm Brackets.
• Alignment required.
• Requires longer shocks – Falcon Performance Shocks recommended.

Install Time: 7 Hours