TeraFlex JK: Dana 44 Rear Axle 8-Lug Full-Float Conversion & Slotted Big Rotors–32-Spline

Eliminate the weak link in your rear axle with this TeraFlex JK: Rear Axle 8-Lug Full-Float Conversion Kit.

Oversized and heavier wheel/tire combos, highspeed impacts, and low range twisting and binding take a toll on JK Wrangler/Unlimited rear axle shafts and wheel bearing assemblies – even with upgraded 35-splineaxle shaft conversions.

All this stress can cause axle shafts to bend.



The twin-bearing full-float design spreads vehicle weight evenly across the forged 4140 chromoly spindles removing vehicle weight from the axle shaft. The case-hardened 4340 chromoly shafts transfer torque to the wheels without the added stress of carrying the vehicle weight.

The spindle accepts readily available industry standard bearings and seals.



All factory sensors are maintained and protected from the elements. Retains OEM park brakes, calipers and pads.



This kit is ideal for overland expedition style driving.





Fits:


• JK Wrangler Rubicon (2-door)

• JK Wrangler Unlimited Rubicon (4-door)






Specs:


• Dana 44 – 65.5”


• Axle Shafts: Rubicon 32-Spline


• Wheel Bolt Pattern: 8x6.5”


• Max Tire Diameter: 37”






Includes:


• Rear Wheel Hubs – pair

• Rear Spindles – pair

• Rear Axle Shafts – pair

• Rear Performance Big Rotor Kit w/ Slotted Rotors (# 4304460)

• All necessary hardware





Note(s):


• We recommend replacing the inner seal when removing an axle shaft. As it makes sense to change both sides and both seals at the same time, the total install time will equal 4.9 hours. This install time includes both the driver and passenger side axle shafts, (2) inner seals, removal of differential, adding oil, and axle reassembly.

• Locking Hub Kits and Full-Float Kits may not work w/ all wheels. Please verify fitment before installation.







Install Time: 5 hours








Rear Axle 8-Lug Full-Float Conversion Configurations:


Dana 44 – 65.5”

• w/ Performance Slotted Rotors – Rubicon 32-Spline (# 3043300)

• w/ Performance Rotors – Rubicon 32-Spline (# 3043200)

• w/ Performance Slotted Rotors – Sport/Sahara 30-Spline (# 3043100)

• w/ Performance Rotors – Sport/Sahara 30-Spline (# 3043000)



Dana 44 – 70”

• w/ Performance Slotted Rotors – Non-Rubicon 35-Spline (# 3043600)

• w/ Performance Rotors – Non-Rubicon 35-Spline (# 3043500)



Tera CRD60 (Semi-Float to Full-Float)

• w/ Performance Slotted Rotors – 3.25” tube 35-Spline (# 3063300)

• w/ Performance Rotors – 3.25” tube 35-Spline (# 3063100)

• w/ Performance Slotted Rotors – 3” tube 35-Spline (# 3063400)

• w/ Performance Rotors – 3” tube 35-Spline (# 3063200)