TeraFlex JK: Dana 30/44 Front Axle 8-Lug Locking Hub Conversion Kit w/ Slotted Big Rotors

Upgrade your Dana 30 or Dana 44 front axle with one of these TeraFlex JK: Dana 30/44 Front Axle 8-Lug Locking Hub Conversion Kits.

Increasing the distance between the inner and outer wheel bearings dramatically reduces bearing load. The bearings ride on a forged 4140 chromoly spindle that uses readily available bearings and seals. The 8x6.5” wheel bolt pattern significantly increases wheel-to-flange strength and durability over a 5-lug bolt pattern.

The SlimLock Hub Kit features forged 4340 chromoly 35-spline stub shafts. Its high-surface area engagement makes them extremely durable. High-speed front driveline failures are eliminated by disengaging the hubs for highway use or flat towing.

The proprietary TeraFlex hub design seals the OEM wheel speed sensors from mud, rocks, and other trail hazards ensuring constant data transmission to maintain all ABS and ESP functions.

Fits:

• JK Wrangler (2-door)
• JK Wrangler Unlimited (4-door)

• Dana 30 front axle
• Dana 44 front axle

Specs:

• Wheel Bolt Pattern: 8x6.5”
• Max Tire Diameter: 37”

Includes:

• Front Wheel Hubs – pair
• Front Spindles – pair
• Stub Shafts – pair
• Dana 60: SlimLock Hub Kit (# 3449350)
• Front Performance Big Rotor Kit w/ Slotted Rotors (# 4303480)
• All necessary hardware

Note(s):

• On 2007-2011 JK Wrangler/Unlimited models, we recommend upgrading the stock master cylinder to our Brake Master Cylinder Kit w/ Oversized Bore (# 4303450).
• All 2013-2018 JK Wrangler/Unlimited Dana 30 and Dana 44 axles use the same 1350 series U-joint 5-7166X.
• We recommend replacing the inner seal when removing an axle shaft. As it makes sense to change both sides and both seals at the same time, the total install time will equal 4.9 hours. This install time includes both the driver and passenger side axle shafts, (2) inner seals, removal of differential, adding oil, and axle reassembly.
• 2007-2012 JK Wrangler/Unlimited Dana 30 axles require new inner shafts w/ larger U-joint end forgings.
• Locking Hub Kits and Full-Float Kits may not work w/ all wheels. Please verify fitment before installation.

Install Time: 4 Hours

Dana 30/44 Front Axle 8-Lug Locking Hub Conversion Kit Configurations:

• w/ Front Big Brake Kit – Slotted Rotors (# 3034413)
• w/ Front Big Brake Kit – Plain Rotors (# 3034412)
• w/ Front Performance Big Rotor Kit – Slotted Rotors (# 3034410)
• w/ Front Performance Big Rotor Kit – Plain Rotors (# 3034411)