TeraFlex JL 4dr: 3.5” Alpine CT3 Long Arm Suspension System – No Shock Absorbers

TeraFlex Alpine CT (Cross-Trail) Suspension Systems build on our Sport ST (Street & Trail) Suspension Systems.

A 3.5” suspension system opens up a new world of tire sizes and off-road possibilities. If you have that “do it all” attitude, one of our 3.5” Alpine CT3 Suspension Systems will make it happen. The Alpine CT3 Long Arm features our Alpine Long Control Arms & Brackets as well as an HD Forged Adjustable Front Track Bar and Front and Rear Track Bar Brackets for maximum tunability and flawless performance for years to come.

Adjustable Alpine Long Control Arms balance front caster angle and pinion angles as well as optimize rear pinion angles, anti-squat geometry, and tire position on vehicles with 3-6” lifts. On higher lifts, Alpine Long Arm Brackets reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during extreme droop as well as shock load transferred through the control arms.

The HD Forged Adjustable Front Track Bar and Front and Rear Track Bar Brackets improve steering response, center the axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling.

This results in improved suspension geometry and relaxed control arm angles for a superior ride quality and performance regardless of terrain. These systems restore front and rear roll axis angles to minimize brake dive and acceleration squat. TeraFlex suspension systems provide reduced noise, vibration, and harshness (NVH).

Alpine CT Suspension Systems are engineered for hardcore Jeeping without sacrificing weekday ride comfort!

We recommend Falcon Performance Shocks. Falcon shock absorbers and TeraFlex lift coil springs have been engineered together to improve both compression and rebound for optimal vehicle stability. Alpine CT Suspension Systems are offered with a choice of Falcon SP2 3.3 Fast Adjust Piggyback Shocks, Falcon SP2 3.1 Piggyback Shocks, or without shock absorbers.

FEATURES/BENEFITS

Alpine CT3 Long Arm:

• Sport/Sahara Fenders: 35” Tires
• Rubicon Fenders: 35-37” Tires
• Adjustable Alpine Long Control Arms & Brackets balance front caster angle and pinion angles as well as optimize rear pinion angles on 3-6” lift kits
• Bolt-on Alpine Long Arm Brackets are gusseted and reinforced for superior strength
• On higher lifts, Alpine Long Control Arms & Brackets reduce bushing stress and shock load felt through the control arms

Cross-Trail:

• Delivers true Cross-Trail (CT) performance
• Dependable performance w/ zero worries
• Positive, responsive handling w/ reduced NVH
• High-quality, maintenance-free factory-style bushings provide excellent vibration damping and ride quality
• Front and rear Progressive Bump Stops provide progressive compression during high-speed suspension movement
• HD Forged Adjustable Front Track Bar and Front (3.5”+) and Rear Track Bar Brackets improve steering response, center axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling
• Full range of movement for off-road flex and articulation
• Install and drive simple bolt-on installation – no welding required
• TeraFlex Lifetime Warranty

INCLUDES

• 3.5” Lift Coil Spring Kits (Front: # 1863000 & Rear: # 1863100)
• Alpine Long Control Arm & Bracket Kit – 8-Arm (3-6” Lift) (# 1316012)
• HD Forged Adjustable Front Track Bar (0-6” Lift) (# 1753420)
• Front Track Bar Bracket (2.5-3.5” Lift) (# 1953250)
• Rear Track Bar Bracket (2.5-4.5” Lift) (# 1953600)
• Progressive Bump Stop Kit – Front & Rear (0-4.5” Lift) (# 1959200)
• 2” Bump Stop Strike Pad Extension Kit – Front & Rear (# 1959500)
• 0.5” Bump Stop Strike Pad Shim Kit – Front & Rear (# 1959300)
• 10.75” Front Sway Bar Link Kit (# 744500)
• 11.5” Rear Sway Bar Link Kit (# XXXXXXX)
• Front Brake Line Anchor Kit (# 1101255)
• All necessary hardware
• And more
• Falcon SP2 3.1 Piggyback Shock Kit (2-4.5” Lift) (# 11-02-31-400-200)

VEHICLE FITMENT INFO

Fits:

• JL Wrangler Unlimited (4-door)

Specs:

• Lift Height: 3.5”

Max Tire Diameter:

• Sport/Sahara Fenders: 35” (w/ 3” front & 2.5” rear bump stops)
• Rubicon Fenders: 35” (w/ 2” front & 2” rear bump stops)
• Rubicon Fenders: 37” (w/ 2.5” front & 3” rear bump stops)

PRODUCT NOTES

• Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters for stock wheels – NOT INCLUDED.
• Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tires.
• Sport/Sahara Fenders require 3” front and 2.5” rear bump stop extensions and shims (included) to fit 35” tires.
• Rubicon Fenders require 2” front and 2” rear bump stop extensions (included) to fit 35” tires.
• Rubicon Fenders require 2.5” front and 3” rear bump stop extensions and shims (included) to fit 37” tires.
• Alignment required.
• Requires longer shocks (not included in base kit) – Falcon Performance Shocks recommended.

RELATED ITEMS

Alpine CT3 Long Arm Configurations:

JL 2-Door:

• w/ Falcon SP2 3.3 Fast Adjust Piggyback Shocks (# 1523133)
• w/ Falcon SP2 3.1 Piggyback Shocks (# 1523131)
• No Shocks (# 1523100)

JL 4-Door:

• w/ Falcon SP2 3.3 Fast Adjust Piggyback Shocks (# 1523333)
• w/ Falcon SP2 3.1 Piggyback Shocks (# 1523331)
• No Shocks (# 1523300)

Alpine CT3 Short Arm Configurations:

JL 2-Door:

• w/ Falcon SP2 3.3 Fast Adjust Piggyback Shocks (# 1523233)
• w/ Falcon SP2 3.1 Piggyback Shocks (# 1523231)
• No Shocks (# 1523200)

JL 4-Door:

• w/ Falcon SP2 3.3 Fast Adjust Piggyback Shocks (# 1523033)
• w/ Falcon SP2 3.1 Piggyback Shocks (# 1523031)
• No Shocks (# 1523000)

INSTALL TIME

27.5 Hours (28.5 Hours w/ shocks)