Home - Return to Previous Page
The strongest and most agile Rear Bumper for the Jeep Wrangler JK 2/4DR 2007 - 2017.
The RH4x4 Rear Bumper is one of our favorite products. Not only is it one of the only rear bumpers made out of 1/4" thick plate steel, it also one of the highest ground clearance with best departure angle.
Our Rear Bumpers are full width to protect your vulnerable corner panels and tail gates. With end plates designed to provide maximum departure angle and clearance, our design prevents you from getting "hung up" on tough trails and sharp, off camber turns. Plus, with oversized tires, rubbing and tire gouging is never a concern. The bottom plate of our bumper hugs the rear cross member behind your Jeep for more ground clearance than even some competition bumper designs.
Strength and Function
Your rear bumper has the potential to take more abuse than any other body armor on your Jeep. Whether its on road traffic collisions or off road rock damage, you need some serious armor to keep you safe. 1/4" thick plate steel is the ultimate armor to protect your vulnerable rear corners, tailgate, and muffler or fuel tank. High clearance corners and a weather resistance finish make this rear bumper a no brainer.
Options
With the addition of our rear bumper comes the opportunity to also protect your exposed and critical muffler. Our bolt-on RH-5001-A Muffler Shield mounts to existing holes on our rear bumper giving you a plate of solid 3/16" steel armor. Once your muffler goes your trip is over and it time to call a tow rig. This simple addition to your RH4x4 rear bumper gives you peace of mind and increased capability.
Ease of Installation
It does not take a PhD to install the best rear bumper and tire carrier on the market. No welding is required and the truly bolt on design makes your garage your own off road shop.
Components
RH4x4 Rear Bumpers are very recognizable for two major reasons: owners bragging about how durable it is and it clean, functional design. What makes up a RH4x4 Rear Bumper is what makes it so strong.
High clearance design to maximize departure angle.
By mounting your rear bumper as close to your frame rails as possible, ground clearance is maximized and protects your rear frame cross member.
Laser cut Hi-Lift jack points for vehicle recovery and trail repair.
Integrated 2" receiver hitch included in every steel rear bumper.
Welded on heavy duty recovery shackle tabs. Our tabs are welded onto the face, travel through the bumper, and are again welded onto the backside of the bumper skin. This is standard Rock Hard 4x4 ingenuity and simply not offered by other manufacturers.
What comes in every kit:
Rock Hard 4x4 Patriot Series Rear Bumper w/o Tire Carrier - Jeep Wrangler JK 2D/4D
RH-5000
Jeep Wrangler JK 2/4DR 2007 - 2017
The RH4x4 Rear Bumper is one of our favorite products. Not only is it one of the only rear bumpers made out of 1/4" thick plate steel, it's also one of the highest ground clearance with best departure angle.
Our Rear Bumpers are full width to protect your vulnerable corner panels and tail gates. With end plates designed to provide maximum departure angle and clearance, our design prevents you from getting "hung up" on tough trails and sharp, off camber turns. Plus, with oversized tires, rubbing and tire gouging is never a concern. The bottom plate of our bumper hugs the rear cross member behind your Jeep for more ground clearance than even some competition bumper designs.
The RH4x4 Rear Bumper is one of our favorite products. Not only is it one of the only rear bumpers made out of 1/4" thick plate steel, it's also one of the highest ground clearance with best departure angle.
Our Rear Bumpers are full width to protect your vulnerable corner panels and tail gates. With end plates designed to provide maximum departure angle and clearance, our design prevents you from getting "hung up" on tough trails and sharp, off camber turns. Plus, with oversized tires, rubbing and tire gouging is never a concern. The bottom plate of our bumper hugs the rear cross member behind your Jeep for more ground clearance than even some competition bumper designs.
Shipping: This item is oversize and requires special shipping arrangements. A handling charge will appear in the shopping cart.
Pricing:
$1,149.95
Description
The RH4x4 Rear Bumper is one of our favorite products. Not only is it one of the only rear bumpers made out of 1/4" thick plate steel, it also one of the highest ground clearance with best departure angle.
Our Rear Bumpers are full width to protect your vulnerable corner panels and tail gates. With end plates designed to provide maximum departure angle and clearance, our design prevents you from getting "hung up" on tough trails and sharp, off camber turns. Plus, with oversized tires, rubbing and tire gouging is never a concern. The bottom plate of our bumper hugs the rear cross member behind your Jeep for more ground clearance than even some competition bumper designs.
Strength and Function
Your rear bumper has the potential to take more abuse than any other body armor on your Jeep. Whether its on road traffic collisions or off road rock damage, you need some serious armor to keep you safe. 1/4" thick plate steel is the ultimate armor to protect your vulnerable rear corners, tailgate, and muffler or fuel tank. High clearance corners and a weather resistance finish make this rear bumper a no brainer.
Options
With the addition of our rear bumper comes the opportunity to also protect your exposed and critical muffler. Our bolt-on RH-5001-A Muffler Shield mounts to existing holes on our rear bumper giving you a plate of solid 3/16" steel armor. Once your muffler goes your trip is over and it time to call a tow rig. This simple addition to your RH4x4 rear bumper gives you peace of mind and increased capability.
Ease of Installation
It does not take a PhD to install the best rear bumper and tire carrier on the market. No welding is required and the truly bolt on design makes your garage your own off road shop.
Components
RH4x4 Rear Bumpers are very recognizable for two major reasons: owners bragging about how durable it is and it clean, functional design. What makes up a RH4x4 Rear Bumper is what makes it so strong.
High clearance design to maximize departure angle.
By mounting your rear bumper as close to your frame rails as possible, ground clearance is maximized and protects your rear frame cross member.
Laser cut Hi-Lift jack points for vehicle recovery and trail repair.
Integrated 2" receiver hitch included in every steel rear bumper.
Welded on heavy duty recovery shackle tabs. Our tabs are welded onto the face, travel through the bumper, and are again welded onto the backside of the bumper skin. This is standard Rock Hard 4x4 ingenuity and simply not offered by other manufacturers.
What comes in every kit:
- Rear Bumper
- Hardware
- Installation Instructions
Product Series
Details
- RH-5000
- RH-5000
- Rock Hard 4X4
- New
Product Series
Shipping Information
- Item Requires Shipping
- 67.0 lbs.
- W17.0000” x H9.0000” x L60.0000”
- $149.00
- This item is oversize and requires special shipping arrangements. A handling charge will appear in the shopping cart.